Wine Filling Line Juice Bottling Machine 0.2 Mpa - 0.4 Mpa Water Pressure

Wine Filling Line Juice Bottling Machine 0.2 Mpa - 0.4 Mpa Water Pressure

I. Description of project

Product: Wine

Capacity: 2000BPH

Suitable bottle: glass bottle

II. List of Main equipment

Note:

• The final equipment size and type should be adjusted according to the fixed product.
• All the machines are designed according to the buyer’s can size.
• This line might be able to treat other sizes, though the relative machines should add necessary parts or change to different design. The undetermined details should be provided to the seller.
• The relevant technical parameters and machine design should be finally confirmed after the estimate of seller, receiving all the details and samples.

III. Main equipment introduction

1. 1.Bottle Raising and Washing Machine

It adopts continuously spraying and washing method. It is mainly used to clean the glass bottles.

2.Wine filling machine

The wine filling machine is a Negative Pressure Filling Machine. It is based on advanced technology. The equal liquid level technology controls the filling. Its Principal features includes: Level positioning accuracy, batter than the industry standard, non-drip, tight and reliable seal. Broken bottles or none bottles not filling, not spilling fluid, clean and hygiene. Automatic adapt the error of the height of bottles, frequency conversion speed regulator, soft start, soft-breaking, non-rigid impact, stability and reliability working .It is the preferred equipment of the winery.

3. Corking machine

This machine is specially used to seal the wine bottles by corks. Its operation is very easy and convenient. No doubt it is the necessary machine for the wine factory.

Features:

1, New structure, less breakdown, long working life, reliable

2, Motor speed controlled by electromagnetic, applicable to a wide range of bottle height.

3, Apply mechanical linkage device, it will not plug the bottle cork without bottle so as to save cork.

Technical Parameters

4. Labeler (Self-adhesive Three Labels Labeler)

Brief presentation:

GD-BTB-03 is specially designed for self-adhesive labels on glass bottles. It is Specially used to stick the three labels: front, back and neck labels. This machine is adopted the Germany label sticking technology, have a very exact stick, stable work.

Main trait and advantage:

1. Reasonable mechanical structure. It is made by SUS304.Turning control design of pallets meets the demand of label marking of round bottles, square bottles, and various special-shaped bottles.

2. Highly automatic control system. The machine adopts Frequency control, PLC control, touch screen dynamic display system, which is equipped with internet module to achieve wide-range steady speed control under internet control. The system includes the following functions: Detection of lubrication pressure and flow, automatic shut in scale-free on back and automatic shut at bottles' burst.

3. Bottles are conveyed to the machine in equal space and pass the photo-sensor, which send single to the label roller and stick the label on the bottle.

4. Advanced infrared detector to realize the precise sticking position.

5. Perfect lubrication system. The body machine is lubricated by pumping oil to be prelubricated before working.

juice bottling machine

automatic bottling machine

Wine Filling Line Juice Bottling Machine 0.2 Mpa - 0.4 Mpa Water Pressure Images